Easy Heat Warm Tiles, Руководство по установке

Страница: 12 / 14

10
7): Tiling
After the screed has hardened, you can tile
the floor using tile adhesive and jointing
mortar suitable for floor heating. Follow the
manufacturer’s instructions.
9): Connecting the thermostat
Connect the cable(s), floor sensor and wiring
to the thermostat as shown in the wiring
diagram of the control. Follow instructions in
the Easy Heat thermostat installation manual.
10): Self-learning thermostat
For floor heating systems with a power over
2300 watts (10A), you need to use the Easy
Control F16C.
8): Electrical wiring
The electrical installation must always
comply with locally applicable standards and
be carried out by a recognized installer.
In case the installation is not installed
properly by local standards there is no
guarantee.
Easy Control F10C Easy Control F16C