Easy Clocking xenio 700, Инструкция по эксплуатации

Страница: 12 / 32

3.
The Xenio has been pre-configured to use DHCP.
This will automatically assign an available IP Address
on your network
If you choose to configure the clock to use
a Static IP , you will need to change the
setting from DHCP to Static .
Once you have specified Static, you will be
able to input your Static IP Address, Default
Gateway and Subnet Mask (pre-configured
to 255.255.255.0)
Connect via Ethernet/Network Cable
1.
Open the Xenio Time Clock Menu
2.
Select Ethernet
4.
Select
SAVE
to complete to process
Ethernet
Tap
Tap
XXXXXX
255.255.255.0
IP Settings
IP Address
Default Gateway
Subnet Mask
DHCP
12
** When using this connection method make sure the WIFI is turned off