PROPER SET-UP AND USE
(CONTINUED)
For safety, follow these set-up and use instructions:
- Never walk, bounce or move ladder while on it.
- DO NOT OVER REACH. Always keep belt buckle
between side rails when climbing or working. You
may lose your balance and/or tip ladder.
- Wind loading can cause unbalance.
- Use extreme caution when pushing or pulling
anything. You may lose your balance and/or tip
ladder.
- Never use the ladder as a brace
- The maximum weight of a person, tools, and
materials must not exceed 150kg
- DO NOT use any components not supplied or
approved by Easy Access Co. with this ladder.
- To set ladder up: Support ladder by laying it on
its side on the ground. Open to desired allowable
position and then stand ladder up. Watch for
overhead wires.
- Never use ladder jacks on this ladder, regardless of
the manner in which it is being used.
- When using as a single or extension ladder, distance
from base to base of support wall must be ¼ of
the working length of the ladder. The ladder must
extend one metre above the roof, where applicable.
PROPER CARE OF PRODUCT
For safety, follow these care instructions:
- Always keep ladder clean of all foreign materials. Clean after each use.
- Check moving parts regularly. Lubricate all moving parts regularly. Use caution not to get lubricant on
rungs or side rail.
5
