FREEPHONE 0800 394 222
[email protected] www.easyaccess.co.nz
POSITION #3
EXTENSION LADDER
1) Configuring the OX Multi-Ladder into the extension ladder position,
as with the stepladder position, the extension ladder position starts
with changing the angle.
Note:
The push knob hinge will catch in each of the 3 positions.
Continue to disengage and rotate the sections until the desired
position is reached.
2) With the ladder standing up, unlock the upper section “J” locks
and walk the upper ladder section out. If more height is needed,
extend the opposite section in the same way. Slide outer sections
apart until desired length is met.
CAUTION
- Hinges and ‘J’ Locks must be secure before climbing ladder
- Never use ladder jacks on this ladder.
- Always face ladder and maintain firm grip while on it.
- DO NOT stand on or above second rung from top of ladder.
10
