MAINTENANCE
CAUTION
：
Before maintenance and checking, power must be turned off, and before
opening the housing, make sure the power plug is pulled off..
1
、
Remove dust by dry and clean compressed air regularly, if welding machine is operating
in environment where is polluted with smokes and pollution air, the machine need
removing dust everyday.
2
、
Pressure of compressed air must be inside the reasonable arrangement in order to
prevent damaging to small components of inter-machine.
3
、
Check inter circuit of welding machine regularly and make sure the cable
circuit is connected correctly and connectors are connected tightly (especially insert
connector and components). If scale and loose are found, please give a good polish to
them, then connect them again tightly.
4
、
Avoid water and steam enter into inter-machine, if they enter into machine, please dry
inter-machine then check insulation of machine.
5
、
If welding machine will not be operated long time, it must be put into packing box
And store in dry environment.
6
、
When wire machine operates for every 300 hours, the electric carbon brush and armature
rectifier should be polished, the reducer should be cleaned, and lubricator should be
added to the turbo and bearing.
BEFORE CHECKING
WARNING
Blind experiment and careless repair may lead to more problem of the machine that will
make formal check and repair more difficult. When the machine is electrified, the naked
parts contain life-threatening voltage. Any direct and indirect touch will cause electric
shock, and severe electric shock will lead to death.
Notice:
In the period of guarantee maintenance, if user makes wrong check and repair
for the induction power without our permission, the free maintenance guarantee offered by
the supplier will be invalid.
Содержание VERSA CUT60
Страница 1: ...USER S MANUAL MODEL...
