14
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
• Install the Z-Axis Limit Switch
[JJ]
to the left upright using the preinstalled
T-nuts and screws. The switch should be towards the front side of the printer.
Plug in the 3-pin connector, from the base assembly, tagged Z
(FIG 25)
.
Also plug in the 6-pin connector for the Z-Axis stepper motor, from the base
assembly, tagged Z.
• Unmount the Control Panel
[P]
from the mount by sliding it upward
(FIG 26)
and
use the preinstalled hardware to install the mount on the right-side aluminum
extrusion base. Reinstall the screen and plug in the ribbon cable
(FIG 27)
.
• Utilize Zip Ties
[GG]
to secure wiring and ensure it won’t be caught up in a print,
on the machine, or on surroundings
(FIG 28)
.
FIG. 27
FIG. 27
FIG. 25
FIG. 25
FIG. 26
FIG. 26
FIG. 28
FIG. 28
✓
✓
