8
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
The Shrinker Stretcher exerts high bending and crushing forces in operation
which can present a hand/finger pinch hazard and cause potentially serious
injuries. Avoid moving parts while operating and wear thick, well-fitting work
gloves to prevent cuts from handling sharp metal. The use of safety shoes is
strongly recommended.
OPERATION
INJURY HAZARD!
The Shrinker Stretcher is equipped with a Handle of the proper length to
provide adequate bending force. DO NOT add pipe, bars or any other devices
which would add additional length to the Handle to increase bending force.
This will exceed the design limits of the tool and can result in severe injury
and/or component failure.
High torque loads are placed on this Shrinker Stretcher during operation. This
tool cannot be operated without adequate support or severe personal injury
or property damage can occur if it should suddenly be become dislodged or
moves while in use. Before beginning ANY work with this tool, it is absolutely
necessary that it be securely bolted to a properly anchored heavy, sturdy
workbench or stand.
Workpiece material should be clean of any rust, burrs, nicks, welds or coat-
ings before attempting to bend or interference and binding may occur.
