10
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
PROBLEM
CAUSE
CORRECTION
Does Not Run
When Switch
is Depressed
No Electric
Power to
Sander
Check 120 VAC input plug connection.
Check for tripped circuit breaker.
Motor Runs
Too Slow/
Develops Low
Power
Undersized or
Too Long of an
Extension Cord
Use only 14 gauge or larger cord.
Limit length to 25'
Excessive
Noise and/or
Vibration
Abrasive Belt
is Damaged
WARNING: This is an extremely dangerous
condition!
Stop use and replace Abrasive Belt!
Motor
Overheats
Excessive
Pressure Being
Applied to
Abrasive Belt
Allow Allow the tool to do the work. Do Not force!
Dirt and Debris
Buildup in
Motor Cooling
Air Slots
Use a brush or compressed air to remove debris.
TROUBLESHOOTING
