background image

To order parts and supplies: 800.343.9353  >>  eastwood.com 

5

 

SHOCK HAZARD!

•  Never operate or store Sander in damp or wet conditions.
•  Plug into a minimum 15 amp circuit. If using an extension cord, it must be 

AWG 14 or greater, no longer than 25'.

 

HEALTH AND INJURY HAZARDS!

•  Dust and fine particles are generated while cutting which can contain 

hazardous or toxic substances. Breathing this dust can cause many serious 
respiratory health conditions. Always use NIOSH approved respiratory 
protection while using this Sander.

•  This Sander will eject particles, dust and sparks at high velocity during 

operation. Wear approved eye and skin protection at all times while operating.

•  Use of this Sander can generate excessive noise. Wear appropriate hearing 

protection while using.

•  The moving Abrasive Belt of this Sander can quickly catch loose clothing, long 

hair or jewelry causing serious personal injury. Keep all loose clothing, long 
hair and jewelry away from operating Sander.

•  This Sander can quickly start up when handling while plugged in to electrical 

supply causing serious personal injury. Always unplug the tool from the 
electrical supply before changing Abrasive Belts or performing maintenance.

•  Sharp metal edges can cut. Always wear protective work gloves while 

handling.

•  Moving Abrasive Belts can quickly cut flesh. Keep hands and fingers away 

from moving Abrasive Belt.

•  This Sander can quickly and violently kick back or twist while operating 

causing severe hand and or wrist injury. Do not apply excessive force to 
Sander while in use. Always make sure the workpiece or material being cut is 
securely clamped or anchored to allow two handed operation of the Sander.

•  Damaged Abrasive Belts can break at high speed causing personal injury or 

property damage. If excessive vibration is felt, discontinue use immediately 
and disconnect tool from electrical supply. Inspect Abrasive Belt and Sander 
for damage. Do not resume use until resolution is found.

•  This Sander will eject a trail of sparks at high speed which can ignite 

flammable materials or injure others nearby. Do not operate in the vicinity of 
flammable materials and keep all persons and pets away from the work area.

ADDITIONAL SAFETY INFORMATION

Содержание 31672













Отзывы: