manualshive.com logo in svg

Eastwood 31639, Инструкция по эксплуатации

Triarch 31639 - это качественный продукт, который обеспечит вам надежное исполнение сборки. На нашем сайте вы можете бесплатно скачать инструкцию по сборке, чтобы с легкостью собрать ваш новый Triarch 31639. Загрузите ее прямо сейчас с manualshive.com.

Поделиться
Скачать
background image

To order parts and supplies: 800.343.9353  >>  eastwood.com 

9

PINCH AND CRUSH HAZARD! 

  Keep fingers and hands away from moving parts when operating. 

CUT HAZARD! 

  Metal edges on wheels can cause serious cuts. Wear thick, well-fitting work gloves to prevent cuts from handling wheels & tires.

INJURY HAZARD! 

  This tool can quickly start up while connected to an electrical supply causing serious personal injury. Always disconnect the  

Wheel Balancer from the electrical supply before mounting/dis-mounting wheels or performing maintenance.

EYE INJURY HAZARD! 

  Rapidly rotating wheel/tire assemblies can eject metal particles, dirt and debris at high velocity. Always wear ANSI approved eye 

protection when operating this tool.

INJURY HAZARD! 

  The Wheel Balancer involves the mounting/dismounting of large, heavy wheel/tire combinations which can present serious injuries  

if dropped. The use of safety shoes is strongly recommended.

 

  The Balancer was specifically designed to be operated by one person only. Never have one person operate the Control Panel while 

another handles the wheel mounting/dismounting or serious injury could occur.

OPERATION 

INJURY HAZARD! 

  The Wheel Balancer consists of large moving components which can present a hand/finger pinch hazard injuries if dropped.  

Avoid pinching hands while handling parts during assembly and/or operation.

 

  Inspect rim and tire before mounting for previous damage or bent conditions. Attempting to spin a damaged rim and or tire can  

result in serious injury and severe Balancer damage.

 

  Wheels and tires MUST be clean and free of all mud, grit or other debris as they will cause an inaccurate balance reading.

 

  All tire pressures MUST be set to specific vehicle or tire manufactures specifications or inaccurate balance readings will result.

Содержание 31639

























Отзывы:

Нет отзывов

Похожие инструкции для 31639

Atlas WB41 Quick Start Manual preview
WB41
Бренд: Atlas Страницы: 10

Бренды по названию

Популярные бренды

Загрузить еще бренды