To order parts and supplies: 800.343.9353 >> eastwood.com
5
REMOVING JAWS
• Loosen (do not remove) Upper Jaw Cap Screws (2 per side) with
a 4mm Hex Key (not included)
(FIG 4)
.
• Pull Upper Jaws away from Body and slide Wire Bail off the
Actuating Bar
(FIG 5)
.
• Loosen Lower Jaw Cap Screws (do not remove) (2 per side) with
a 4mm Hex Key (not included).
• Pull Upper Jaws away from Body
[A] (FIG 6)
.
ATTACHING JAWS
• Slide Lower Jaws onto Body with screw slots located under
Cap Screws and Washers.
• Tighten Lower Jaw Cap Screws with a 4mm Hex Key (not included).
• Slide Upper Jaws onto Body with screw slots located under Cap
Screws and Washers.
• Place Wire Bail over top of Actuating Bar.
• Tighten Upper Jaw Cap Screws with a 4mm Hex Key (not included).
FIG. 4
FIG. 5
FIG. 6
