To order parts and supplies: 800.343.9353 >> eastwood.com
3
READ INSTRUCTIONS
• Thoroughly read and understand this manual before using.
• Save for future reference.
INJURY HAZARD!
• This tool has leveraged rotating components that generate greatly amplified crushing and bending forces which can quickly cause
severe injury! Keep fingers and hands away from moving parts when operating.
• Tremendous external torque loads are placed on this Shrinker Stretcher during operation. This tool cannot be operated without
adequate support or severe personal injury or property damage can occur if it should suddenly be become dislodged or moves
while in use. Before beginning ANY work with this tool, it is absolutely necessary that it be securely bolted to a solid work surface.
• Strenuous physical force may need to be applied to the Shrinker Stretcher during use. Failure to ensure proper footing can quickly
result in a fall which could inflict serious personal injury or property damage. Always work in a clean, uncluttered environment.
• Be sure there is sufficient working room around the tool to allow for safe handling of various sizes of metal.
• The Shrinker Stretcher is equipped with a Handle of the proper length to provide adequate bending force. DO NOT add pipe, bars or any
other devices which would add additional length to the Handle to increase bending force. This will exceed the design limits of the tool
and can result in serious injury and/or component failure.
• Tremendous external torque loads are placed on this Shrinker Stretcher during operation. This tool cannot be operated without
adequate support or severe personal injury or property damage can occur if it should suddenly be become dislodged or moves while
in use. Before beginning ANY work with this tool, it is absolutely necessary that it be securely bolted to a solid, level, well supported
surface capable of withstanding the tremendous torque and side loads this tool is subjected to during use.
CUT HAZARD!
• Handling sharp metal can cause serious cuts. Wear thick, well-fitting work gloves to prevent cuts from handling sharp metal.
EYE INJURY HAZARD!
• Pieces of mill scale, rust and other debris may be ejected from the workpiece during operation. Wear ANSI approved eye protection
while operating.
• The Shrinker Stretcher consists of heavy metal components which can present a hand/finger pinch hazard and cause potentially
serious injuries if dropped on feet. Avoid pinching hands while handling parts during assembly and wear thick, well-fitting work
gloves to prevent cuts from handling sharp metal. The use of safety shoes is strongly recommended.
• Excessive resistance while operating could indicate a defect with the workpiece material or broken or damaged Shrinker Stretcher
components. To avoid injury, stop work immediately and inspect workpiece material for nicks, dents, welds, excessive scale or
remaining coatings. Clean or repair as necessary or discard and begin with a new piece. Also inspect Shrinker Stretcher
components for looseness or damage.
