To order parts and supplies: 800.345.1178 >> eastwood.com
3
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling, and on all other information provided with this product:
READ INSTRUCTIONS
• Thoroughly read and understand this manual before using.
• Save for future reference.
INJURY HAZARD!
• This tool has leveraged movable components that generate greatly amplified crushing and bending forces which can quickly cause
severe injury! Keep fingers and hands away from moving parts when operating.
• Handling sharp metal can cause serious cuts. Wear thick, well-fitting work gloves to prevent cuts from handling sharp metal.
INJURY HAZARD!
• Tremendous external loads are placed on this Shrinker Stretcher during operation. This tool cannot be operated without adequate
support or severe personal injury or property damage can occur if it should suddenly become dislodged or moves while in use.
Before beginning ANY work with this tool, it is absolutely necessary that it be securely bolted to a heavy, sturdy, anchored workbench.
FALL HAZARD!
• Strenuous physical force may need to be applied to the Shrinker Stretcher during use. Failure to ensure proper footing can quickly
result in a fall which could inflict serious personal injury or property damage. Always work in a clean, uncluttered environment.
• Be sure there is sufficient working room around the tool to allow for safe handling of various lengths of material.
EYE INJURY HAZARD!
• Particles of metal, filings and other debris may be ejected from the workpiece during operation. Wear approved eye and skin
protection at all times while operating.
INJURY HAZARD!
• Excessive resistance while operating could indicate a defect with the workpiece material or broken or damaged Shrinker Stretcher
components. To avoid injury, stop work immediately and inspect workpiece material for nicks, dents, welds, excessive scale or
remaining coatings. Clean or repair as necessary or discard and begin with a new piece. Also inspect Shrinker Stretcher
components for looseness or damage.
