Eastsign RS-1800R Скачать руководство пользователя страница 10

Страница: 10 / 14

Eastsign

OLL

SIL

TTER

USER

MANU

8. Important Notice

8.1.

Slitter must be placed on flat, dry, open and solid concrete ground. Working place must be dry, clean and

well-ventilated. Reserve at least 1m working space around the machine for operation and at least 2m (RS

-1800R) or 3.5m (RS-3300R) on the right side of the machine for loading or unloading.

8.2.

Electricity of equipment is 220V, 50HZ, single phase. If power supply is 110V inform Eastsign to add

transformer in advance.

8.3.

Check the voltage from main power supply if it matches rate voltage marked on machine. Make sure that

it is connected to ground and avoid short circuit.

8.4.

Non

‐

operators should stay away from the machine during cutting

8.5.

Lubricate the machine regularly

8.6.

Check and fasten all screws or bolts regularly

8.7.

Conceal the blade by blade cover when it is not working

8.8.

Switch off the machine when the machine is under maintenance

8.9.

Report to Eastsign engineers by sending images or video if the machine is not working properly

Содержание RS-1800R















Результаты поиска

Содержание RS-1800R

Отзывы:

Бренды по названию

Популярные бренды

Eastsign RS-1800R, Руководство пользователя

Результаты поиска

Содержание RS-1800R

Отзывы:

Бренды по названию

Популярные бренды