OPERATORS MANUAL
28
May 1997 – 5B6729
Selecting a Replenishment Mode
Description:
Automatic Replenishment Mode
Select this mode when you want the Processor to automatically adjust the replenishment volumes for
developer and fixer according to film usage. See the procedure “Setting the Developer and Fixer
Replenishment Volumes” beginning on Page
Flooded Replenishment Mode
Select this mode if your site has low film usage of less than 25 sheets of 35 x 43 cm (14 x 17 in.) film
or equivalent area per 8-hour day. Check with your Kodak representative to see whether the
Flooded Replenishment Mode is right for the film usage of the Processor. Replenishment will be added
automatically —
• every 5 minutes
• when the equivalent film area of 35 x 43 cm (14 x 17 in.) has been processed.
Tank Fill Mode
Select this mode to fill empty Processor Tanks automatically. A warning error stating that the “Tanks
Currently Being Filled” occurs as the Tanks are filling. After the Tanks are filled, the error is cleared
and the Processor will begin normal operation.
Disable Replenishment
Select this feature to disable the Replenishment Pumps before doing any of the cleaning procedures.
When the Pumps are disabled, a warning error stating that the “Replenishment Pumps Disabled”
occurs. To clear the error, simply select either Automatic or Flooded Replenishment.
Default Setting: Automatic
Procedure:
[1] Press the “GO TO SETUP” key.
Note
The “SELECT CYCLE” key does not appear if you have selected the K/RA cycle.
[2] Enter the 4-digit access code.
[3] Press the “MORE” key.
[4] Press the “OPTIONS” key.
READY
STD
DRYER
TEMP
SLEEP
SELECT
CYCLE
MORE
GO TO
SETUP
1
2
3
4
CANCEL
REQUEST
▲
▼
CHEM/
CYCLE
MORE
DONE/
RETURN
INFO
SETUP
OPTIONS
DONE/
RETURN
