5B6729 – May 1997
11
Limiting Access to the Processor Setup
Enabling the Limit Access feature prevents users from adjusting the Dryer temperature or changing the
processing cycle without first entering the access code. When this feature is selected, only those
operators who know the correct access code have the ability to change the dryer temperature or the
processing cycle. While this feature is selected, the Cycle Change Switch on the feed end of the
Processor remains inactive.
Changing the User Access
[1] From the Walk-Up Menu, press the “GO TO SETUP” key.
[2] Enter the 4-digit access code.
[3] Press the “MORE” key.
[4] Press the “OPTIONS” key.
[5] Press the “MORE” key.
[6] Press the “USER ACCESS” key.
[7] Press the “LIMIT ACCESS” key.
[8] Press the “DONE/RETURN” key repeatedly until you return to the display shown below. Then press the “YES”
key to return to the Walk-Up Menu.
READY
STD
DRYER
TEMP
SLEEP
SELECT
CYCLE
MORE
GO TO
SETUP
1
2
3
4
CANCEL
REQUEST
▲
▼
CHEM/
CYCLE
MORE
DONE/
RETURN
INFO
SETUP
OPTIONS
DONE/
RETURN
REPLEN
MODE
DAILY
STARTUP
DISPLAY
UNITS
MORE
DONE/
RETURN
ACCESS
CODE
USER
ACCESS
TEMP
LOCK
MORE
DONE/
RETURN
CURRENT ACCESS IS LIMITED
LIMIT
ACCESS
ALLOW
ACCESS
DONE/
RETURN
EXIT SETUP?
YES
CANCEL
REQUEST
