Troubleshooting 29
Troubleshooting
Problem
Possible Cause
Solution
Control power lamp
does not light.
•
Power not connected.
•
Fuse burned out.
•
Defective switch.
•
Disconnected wire.
•
Connect power; switch on.
•
Replace fuse.
•
Replace switch.
•
Check wire connections.
No fuse breaker
tripped.
•
Poor connection.
•
Electrical leakage.
•
Check heating wire.
•
Check all wiring sections.
Conveyor belt can be
pushed by hand.
•
Belt tension too loose.
•
Belt tension too tight.
•
Adjust belt tension screw.
•
Adjust belt tension screw.
Belt cannot be pushed
by hand.
Failure under Normal
Status.
•
Defective motor gear
head.
•
Driving chain tension too
tight.
•
Disconnected wire.
•
Defective motor.
•
Defective contact plug.
•
Defective relay unit.
•
Defective limit switch.
•
Replace part.
•
Adjust driving chain.
•
Replace part.
Material outfeed roller
failure.
.
•
Disconnected wire.
•
Defective drive motor.
•
Defective relay unit.
•
Replace part.
Material moves
•
Defective brake box.
•
Wrong material setting
position.
•
Replace part.
•
Adjust material setting
position.
Zig-zag line.
•
Unbalanced material
tension lever.
•
Wrong tension roller
position.
•
Wrong triangle unfolder
angle.
•
Adjust item as required.
Material does not
move.
•
Film perforator does not
allow film to roll out.
•
Adjust spring.
Содержание Value VS1620TK
