28 Maintenance
4. Remove the insert and cutting rule, both at the same time.
5. Place the replacement cutting rules into the new inserts, both at the same time,
ensuring that the beveled edge is in the corner.
6. Push the beveled edges together.
NOTE: The inside beveled edges of the cutting rule need to come
together. The outsides do not. Be sure the cutting rules are
touching.
7. Reinstall any attaching hardware removed earlier, but do not tighten at this point.
8. Heat the seal bar up to the set point.
9. Adjust insert and cutting rule if they separate at the corner.
10. Tighten the attaching hardware while the seal bars are hot.
11. Turn off heat and allow the sealer to cool down, and then reinstall film clamps.
Rollers
Make sure the rollers stay clean and grease free. If you should have to clean the rollers,
simply wipe them down with a clean lint free cloth. If a more thorough cleaning is
necessary, wipe the rollers down with a mild detergent and water and let dry. DO NOT
splash water or other liquids into the machine.
Never use harsh or abrasive cleaners
or chemical agents when cleaning this machine.
Содержание Value VS1620TK
