EASTAR UHP-1000 SERIES SATELLITE ROUTER
INSTALLATION AND OPERATION MANUAL, V. 2.3
(SW VERSION 2.2.9)
© ROMANTIS 2010
20
www.romantis.com
The easiest way to configure the router is using its HTTP access via its LAN port.
2.2.5
Local access to router via HTTP interface
HTTP (WWW) interface allows configuration key parameters and monitoring its actual status
of the router. Local Web page of the router can be accessed from any Internet browser.
By default, UHP-1000 router is configured with IP-address 192.168.222.222 with mask
255.255.255.248 (/29). Respectively, the computer should be configured with an address,
e.g. 192.168.222.217 with the same mask.
In case the satellite routers have been preconfigured at the factory on customer’s request
such routers may have different default IP address. In such case the respective IP
addresses will be listed in the passport of the router. If it’s impossible connecting the router
with any of specified addressed please reset the router to factory settings (see Section
Ошибка! Источник ссылки не найден.
).
2.2.6 HTTP interface
HTTP (WWW) interface is intended for the initial configuration of the router to operate in a
TDM/TDMA terminal mode (main mode of operation), as well as for monitoring key
parameters in the process of satellite pointing and its further exploitation. Configuration of
the router to work in other modes of operations is described hereafter and in respective
Addendums to this Manual
Figure 13 TDM/TDMA terminal installations page
Parameters entered on this page, must be provided by Satellite Network administrator
before installing the terminal.
Table 4 TDM/TDMA Configuration Web page values
Item
Value
Description
LNB power
Off / V-13V / H-18V
LNB powering modes
Freg. (KHz)
950 000-2 150 000
Outroute IF frequency in kHz (L-band)
Symbol Rate
250-39 000
Outroute Symbol Rate, ksps
TDMA
ON/OFF
Activation of normal TDMA transmission (Inroute)
CW
950 000-1 550 000
Frequency of unmodulated carrier (maintenance)
Network (1-7)
1-7
Network number
Inroute (1-31)
1-31
Number of return channel (Inroute)
Station (1-252)
1-252
Unique terminal ID
DTTS (us)
-10 000…10 000
Difference of time to satellite (acc to Hub), in us
TX 10M signal
ON/OFF
Activation of 10 MHz reference for BUC
TX 24V power
ON/OFF
BUC powering (24VDC) modes
Transmit enable
ON/OFF
Activation of transmission
Level (0-360)
0-360
Transmit power level
