21
20
EASTOAK.COM
TABLETOP PATIO HEATER
OWNER’S MANUAL
9
Using 20lbs propane tank for working. Move the connector of gas
hose through the holes at bottom of cylinder housing. Connect the
gas regulator. Connect the other side of gas hose to the propane tank.
Make sure all connections are tighten.
ASSEMBLY INSTRUCTIONS
• The propane gas and cylinder are sold separately.
• Every part of the heater shall be secure against
displacement and shall be constructed to maintain
a fixed relationship between essential parts under
normal and reasonable conditions of handling and
usage. Parts not permanently secured shall be
designed so they cannot be incorrectly assembled
and cannot be improperly located or misaligned
in removing or replacing during cleaning or other
servicing.
• Disconnect the cylinder when the appliance is not used.
• Store the appliance indoors only if the cylinder is disconnected and removed from
the appliance. A cylinder must be stored outdoors in a well-ventilated area out of
the reach of children.
• A disconnected cylinder must have dust caps tightly installed and must not be
stored in a building, garage or any other enclosed area.
• The maximum inlet gas supply pressure: 150 psi /1034 kPa.
• The minimum inlet gas supply pressure: 5 psi /35kPa.
• Manifold pressure with regulator provided: 11 inch W.C/ 2.74 kPa. The minimum
hourly of 4000 Btu /1.2 kW is required input rating for an appliance for automatic
operation at ratings less than full input rating.
• Use the pressure regulator supplied with the appliance.
• The installation must conform with local codes, or in the absence of local
codes,with National Fuel Gas Code, ANS Z223.1/NFPA54,Natural Gas and
Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code,
B149.2.
• Certain materials or items, when stored under the heater, will be subjected to
radiant heat and could be seriously damaged.
• Use only a cylinder marked for propane. A dented, rusted or damaged propane
cylinder may be hazardous and should be checked by your cylinder supplier.
Never use a propane cylinder with a damaged valve connection.
This product is suitable for a 1.02 lb small gas tank. If you need to use a 20lb
large gas tank externally, you need to purchase an additional 1 lb to 20 lb
converter with hose accessories.
Standard 1.02 lb. tank
orientation to
provide vapor
withdrawal
7.9 in. / 20cm
3.9 in.
/ 9.8cm
