background image

10

WARNING!

 

Observe the safety instructions on page 6 

before using the product.

Make sure that the following requirements are met 

before using the Charging Robot:

—   The authorised electrician have set up the electrical 

connection properly.

—   The charger is properly configured.

—   The software is up to date (see page 11).

—   If you have set up access control, unlock it by using a 

registered RFID tag or disable it from the Easee App 

or the local WiFi interface.

1.

   Check the charging cable and connector for damage 

and impurities such as foreign objects and water 

ingress before charging.

2.

  Connect the charging cable to the Charging Robot 

and your electric car. The charging process starts 

and adapts automatically to the electric car and 

the available energy at any time according to the 

configuration.

If the car does not start charging, check that charging 

is activated in your car and that the connectors are 

properly plugged in. If charging still does not start, check 

what might be the cause on page 11.

Smart charging

Some operators offer smart charging which will delay 

charging to a suitable point in time, often tied to 

electricity price or similar mechanisms. When Smart 

charging is active the LED strip is lit blue, charging will 

not start until the operators criteria for charging is met. 

Contact you operator to know more and to find out if 

they offer this service.

How do I charge?

Apps and interfaces

WiFi interface

The WiFi interface is intended for local operation of the 

charger. It is not depended on an internet connection, 

but it needs a smartphone to be accessed.

Easee app

The Easee app is intended for everyday use of your 

Easee products. It can be used anywhere in the world 

through the Easee Cloud.

The Easee app can be downloaded from the application 

store of your iOS or Android mobile device. 

Easee Portal

The Easee Portal is a tool intended for administration of 

one or several Easee sites.

The Portal is mainly intended for site owners, installers, 

administrators, service providers and people who need 

to manage several products and sites from one interface.

Go to 

easee.support

 for more information on our 

interfaces.

Содержание Plug and Play

















Отзывы: