Easee Plug and Play, Руководство по установке пользователя

Страница: 6 / 16

6
Read the entire manual carefully before installing
and operating the product. Observe the following
instructions:
Safety instructions for operation
— Danger to life due to high electrical voltage. Never
make any changes to components, software or
connecting cables.
— Never use or touch the product if it is damaged or
does not function properly.
— Always have the prescribed maintenance, installation
and any repair work carried out by an authorised
electrician and in accordance with local requirements.
— If a fire occurs, do not use water for extinguishing.
— Never clean the Charging Robot with high pressure or
running water.
— Do not immerse the product in water or other liquids.
— If the light strip on the product lights up red, there is a
fault. For more information, see page 11.
— Make sure that children do not play with the product.
— Never touch the contacts of the Type 2 socket and
never insert foreign objects into the product.
— Never use the charging cable if it is damaged or if the
connections are wet or dirty.
— Do not use extension cords or adapters in
combination with the product.
— The charging cable must only be removed from the
Charging Robot by pulling the plug handle, not by
pulling the cable.
— Make sure the charging cable does not cause a
tripping hazard or risk being run over by a car.
— Even if the Charging Robot is designed to withstand
normal weather conditions, we recommend
protecting it from direct sunlight or exposure to
extreme weather conditions.
— Do not use the product near strong electromagnetic
fields or in the direct vicinity of radio transmitters.
Safety instructions