EAS Electric ETH-80VM, Инструкция по установке и эксплуатации

Страница: 192 / 199

16
6.7 Service information
6.7.1 About service information
6.7.2 How to go to service information menu
Use ''▼''
、
''▲'' to scroll and'' UNLOCK'' to select LOCK or UNLOCK.
The temperature can't be adjusted when the temperature is
locked.The mode can't be changed when the mode is locked. If you
want to change them, you must unlock them use the CHILD LOCK
function.
Service information menu contents as following:
1) service call: to check service call for contacting;
2) error code: to check the error code mean;
3) parameter: to review the operation parameters;
4) display: to set the display.
■ Go to ''MENU'' > ''SERVICE INFORMATION''. Press ''OK'' .
The following page will appear:
■ The service call can show the service phone or mobile nember.The
installer can input the phone number.See FOR SERVICEMAN
,
SERVICE INFORMATION
DISPLAY
PHONE NO. 0000000000000
MOBILE NO. 0000000000000
ERROR
CODE
SCROLL
PARAMETER SERVICE
CALL
SERVICE INFORMATION
DISPLAY SERVICE
CALL
E2
E2
E2
E2
14:10 01-08-2015
14:00 01-08-2015
13:50 01-08-2015
13:20 01-08-2015
SCROLL ENTER
OK
PARAMETER ERROR
CODE
SERVICE INFORMATION
DISPLAY SERVICE
CALL
ROOM SET TEMP.
MAIN SET TEMP.
TANK SET TEMP.
ROOM ACTUAL TEMP.
26ºC
55ºC
55ºC
24ºC
ERROR
CODE
SCROLL ENTER
OK
PARAMETER
SERVICE INFORMATION
SERVICE
CALL
LANGUAGE
BACKLIGHT
BUZZER
SCREEN LOCK TIME
EN
ON
ON
120SEC
ERROR
CODE
SCROLL ENTER
OK
PARAMETER DISPLAY
Use ''OK'' to enter and use ''◄''
、
''►''
、
''▼''
、
''▲'' to scroll.
Press OK the page will appear:
press OK to show the mean of the error code
：
12:30 08-08-2015 SAT.
E2 comunication fault between
controller and indoor unit
Please contact your dealer.
CONFIRM
OK
SERVICE INFORMATION
DISPLAY SERVICE
CALL
E2
E2
E2
14:00 01-08-2015
13:50 01-08-2015
13:20 01-08-2015
SCROLL ENTER
OK
PARAMETER ERROR
CODE
E2 14:10 01-08-2015
■ A total of eight fault codes can be recorded.
INFORMATION
Error code is used to show when the fault or proction happen and
show the mean of the error code.
The display function is used to set the interface, the main items is
language,backlight, buzzer and screen lock time:
Information
Now there is only one language English in the interface.
The parameter function is used to display the main parameter, there
are two pages to show the parameter:
6.8 Operation Parameter
This menu is for installer or service engineer reviewing the operation
parameter.
■ Press ''OK''. There are five pages for the operating parameter as
following. Use ''▼''
、
''▲'' to scroll.
■ At home page, go to ''MENU'' > ''OPERATION PARAMETER''.
OPERATION PARAMETER
OPERATE MODE COOL
COMPRESSOR CURRENT 12A
24Hz COMPRESSOR FREQUNCY
54MIN COMP.RUN TIME1
65MIN COMP.RUN TIME2
10MIN
COMP.RUN TIME3
SCROLL 1/5
V.2