2.3 Placement
2.4 Start to use
The cooler shall stay for half an hour before connecting power when it is firstly
started.
Do not connect cooler to electronic energy saving plug and converter that can
convert DC into AC (E.g.: solar energy system, ship grid).
Clean up the inner chamber before put into use for first time .
Water drop or frost will be generated on
when compressor
is running, which is decided by function of cooler.
s the back will wipe them out automatically. The defrosted water will be
collected into drain tank, then inflow into water disposal pan above the compressor
and vaporized.
back
side
of
wine
cooler
wiping out
frost
or water
drop
is
not
needed a
2.5 The arrangement of bottle
l
Do not let bottle touch the
in order to maintain good air circulation in the cooler.
l
The bottle number here may be different from bottles in different shape and size.
l
The capacity for bottle storage in the wine cabinet is based on the following marked bottle size. Oversized
bottle may have impact on the number of bottle storage in the wine cabinet.
back
side
of
wine
cooler
( The picture above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor )
Φ
30mm
Φ
75mm
215mm
300mm
The cooler is placed in a well-
ventilated indoor place; the
ground shall be flat, and sturdy
(rotate left or right to adjust the
feet for levelling if unstable).
Before using the cooler,
remove all packaging
materials including
bottom cushions and
foam pads and tapes
inside the cooler, tear
off the protective film on
the door and the cooler
body.
Avoid direct sunlight and
heat sources such as
stove, heating radiator,
etc.
The top space of the
shall be greater than 30cm,and
the distances from bothsides
and backside shall be more
than 10cm to facilitate heat
dissipation.
cooler
V.1
8