Lock key
Light switch key
Display area
Temperature-rise key
Temperature-drop key
2.2
Temperature Control
(The picture above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor
）
Display Control
when power on the wine cooler for 1st time, the display screen will display in full for 3 seconds, and the
start-up tone will ring, and then enter into the display of normal running;
When it is in the locked state, the display screen will turn off if no key operation for 30 seconds; the display
screen recover the normal display if any key operation.
Except the lighting function, the following functions will be carried out under the unlocked state.
Locking and unlocking
Under the locked state, long press the Lock key ( ) continuously for 3 seconds, the locking will be
relieved; the display area will blink;
Under the unlocked state, long press the
"
Lock key ( )
"
continuously for 3 seconds to enter into the locked
state;
"
"
Lighting
Press the light switch key ( ) to turn on or turn off the light.
"
"
Switching of the Fahrenheit temperature and Celsius temperature
Press the Temperature-rise key ( ) and the Temperature-drop key ( )
to finish the switch
of the Celsius temperature and Fahrenheit temperature; the display area will show the setting Fahrenheit
temperature or Celsius temperature under the existing mode.
"
"
"
"
at same time
Temperature setting
Press the Temperature-rise key ( ) , the temperature will increase 1
℃
(or ). After locking, the cooler will
run according to the setting value;
Press the
"
Temperature-drop key ( )
"
, the temperature will decrease 1
℃
(or
℉
). After locking, the cooler will
run according to the setting value.
"
"
℉
Setting range of the Celsius temperature: 5
℃
~18
℃
; setting range of the
Fahrenheit temperature: 41
℉
~65
℉
.
Memory function
The cooler has the power off memory function. After power on again, the cooler will run according to
the setting before the power-off.
Fault indication
If the indication of the following table is displayed on the display area, it means the cooler is with fault.
Fault code
Description
E 1
E 4
Temperature sensor of the wine
cooler with fault
Defrosting sensor of the wine
cooler with fault
When the above faults are displayed on the screen, please do not disassemble wine
cooler to check by yourself. Please contact the special maintenance personnel of the
local after-sales service company for the maintenance.
This cooler adopts the touch control of the glass door. Touch slightly when pressing the keys. It is to be avoided that
the area of the display panel is scratched by the sharp things and it shall be kept away from the environment of high
magnetic field and high humidity. Otherwise the cooler is possible not to be set and operate normally.
V.1
7
