EAS Electric ECIN Series, Инструкция по эксплуатации

Страница: 36 / 52

3
-
5 Wire Connection of Indoor Unit Body and Panel
3
-
6 Installation of Wind Grill and Cover
3 5 1 Connect wire joints of electric motor of swing panel. (on decorative panels)
3 5 2 If joints are not connected, swing panel will not work. Be sure to properly connect joints.
3 5 3 Check if wire of electric motor of swing panel is placed between indoor unit and decorative
panel.
- -
- -
- -
Diagram for Wire Connection of Indoor Unit Body and Panel
8
3
.
Installation of Indoor Unit
Correctly insert four bolts on
the cover into corresponding
holes of the panel before
installation.
(
1
)
Installation of wind grill
Install according to reverse procedures
of “Preparation of Decorative Panel”.
Turn around the wind grill and install in
four directions. If it is necessary to adjust
the installation direction of wind grill, or
users propose such requirement,
change its installation direction.
( )
2 Fix the cover on the angle
As shown in the following figure, connect
the string of cover with the bolt of the
decorative panel.
When installing the wind grill, be sure
not to involve wire of electric motor of
swing panel.
Install the cover on the
decorative panel .(refer
to the following figure)
Correctly insert four bolts on the
cover into corresponding holes of
the panel before installation.
V.2