Problem
Possible cause
Possible correction
The motor does not run
Power failure / unit not
plugged into a working
receptacle.
Check to make sure unit is plugged into a
working outlet. Make sure extension cord is
not damaged.
The material to be shredded
is not pulled in.
The material is jammed in
the feed inlet.
The cutting line is tangled.
Disconnect the power supply and unplug
the funnel handle. Pull the material from the
feed inlet. Replace the funnel handle.
Disconnect the power supply. Expose
the
spinning
head. Unwrap
the
tangled
lines
.
Cutting
line becomes worn.
Disconnecting the unit from the power
supply. Replace
with
new
line
.
TROUBLE SHOOTING
14
Model
LM71313
Call us first with questions about operating or maintaining your product at 1
-
800
-
633
-
1501
between 8:00 a.m. –
5:00
p.m. Eastern Standard Time, or get assistance on www.americanlawnmower.com.
CALL US FIRST !!
