Assembly and Operation Instructions
2600A-PLUS_M52215_July2021
PAGE 5
PAGE
OPERATING INSTRUCTIONS
Obtain proper setting for material to be used from the enclosed SETTING MATRIX included with this spreader, or
from our web site under the MANUALS SECTION.
Set stop bolt on rate gauge assembly to the proper rate setting.
While pushing spreader forward, pull control lever back to stop bolt, to stop spreading, push lever forward to close
flow holes before you stop moving.
When finished, empty any remaining material from hopper, rinse spreader, apply coating of light oil to all metal
parts. The gearbox is sealed and lubricated at the factory.
The
SideSpread-Control
is a patented innovation that is superior to side deflectors. Side deflectors
block material leaving the impeller. This blocked material is now consolidated into a 2-
3” wide path
on the left inside wheel of your spreader. This equates to wasted fertilizer, dark green stripes, and in some
cases this extra fertilizer (seven times) will damage the lawn.
SideSpread-Control
maintains the correct application rate while not placing material on driveways, sidewalks,
flowerbeds, or worse, the storm drains in your street. This saves you money and keeps you from damaging your lawn.
To engage
SideSpread-Control
:
1)
Locate the lever on under the right side of the hopper.
2)
Slide the control lever from the front to the back.
3)
Position the left wheel of your spreader 6
″–
12
″
from the sidewalk, flowerbed, or driveway and spread as
normal.
4)
When you have completed this spreading pass, close the control lever to “0”, and then open the
SideSpred-
Control™
by sliding the control lever from back to the front, for a
FULL
, 180 degree spread pattern.
CUSTOMER SERVICE
| 1009 Maple Street, Bristol, IN 46507
ONE YEAR WARRANTY
EarthWay Products, Inc. warrants this product free of defects in original workmanship and materials for a period of one year to the
end user with the original purchase receipt. If a manufacturing non-conformance is found, EarthWay Products, Inc. at its discretion
will repair or replace the part(s)/product at no charge provided the failure is not the result of incorrect installation, mishandling,
misuse, tampering, or normal wear and tear as determined by EarthWay.
EarthWay at its discretion may require that the part(s) or product be returned along with the original purchase receipt for
examination and compliance with the terms of this warranty. Do not return any product without first receiving authorization from
EarthWay Products, Inc.
To seek remedy under this warranty, contact EarthWay Products, Inc. at [email protected] or write to EarthWay
Products, Inc. 1009 Maple Street, Bristol, IN 46507 and describe the nature of the manufacturing defect. SPECIFIC
LIMITATIONS: This warranty covers only the part(s) or product; any labor charges associated with repair or replacement of
non-conformances are specifically excluded. Due to the corrosive nature of most fertilizers and ice melt products, EarthWay
Products, Inc. makes no warranty against and specifically excludes part(s) or product degradation or failure due to corrosion or
its effects.
