This triangle, which appears on your component,
alerts you to the presence of uninsulated,
dangerous voltage inside the enclosure -
voltage that may be sufficient to
constitute a risk of shock.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This triangle, which appears on your component,
alerts you to important operating and
maintenance instructions in this
accompanying literature.
System Installation Considerations
There are several factors to consider before
installing Earthquake Sound’s XJ-700DSP amplifier.
What are the intended listening zones?
From where in each zone will the listener prefer
to control the system? Where will the amplifier be
located?
Where will the source equipment be located?
Safe & Proper handling
The XJ-700DSP amplifier is considerably light
weight and easy to maneuver. However, we
encourage you to take precaution when unpacking
the unit to prevent any possible damage to your
XJ-700DSP. We further suggest the following:
Do not apply downward or upward pressure
against the speaker terminals as this will cause
damage to the terminals.
When carrying the XJ-700DSP, make sure that
the speaker terminals are away from your chest,
eliminating the chance of pushing against them.
Do not drop the XJ-700DSP or subject it to
sudden shocks. This will damage the external
finish and may cause internal damages to the
amplifier.
Avoid exposing the XJ-700DSP to moisture.
Water will damage the amplifier.
Cleaning the XJ-700DSP is best done using
soft cloth. If needed, use mild detergent with
water. Like any other electrical unit, always
unplug the unit before cleaning it.
Connection Tips
Keep all power cords away from all signal cables to
prevent humming from induced noise.
Choose reliable signal cable cords (Earthquake
Sound also specializes in high performance RCA
cables and patches).
All speaker wires that are ran through the walls
should be twisted type to reduce potential hum
noise pick-up.
It is best to use a grounded electrical outlet to
power the amplifier. Lack of input ground
reference could be unsafe. Consult with your
electrical contractor about proper grounding.
Unpacking the XJ-700DSP
Keep the original carton and packing materials for
future shipment or storage.
Check for any visual signs of damage. If you
encounter any concealed damage, consult your
Earthquake Sound dealer before proceeding with
unit installation.
Retain the sales receipt as it establishes the
duration of the limited warranty and provides
information for insurance purposes.
The XJ-700DSP is packaged well for safety. We
highly suggest having a padded surface when
unpacking it.
Specifications are subject to change without notice.
XJ-700DSP Manual 5
