The XJ-700DSP has two speaker output terminals.
The power output is evenly divided between the two
terminals. In this case, a minimum of 4-Ohm load/
impedance is required on each terminal.
In case the connected subwoofers become out of
phase with the rest of the system, adjust the phase
shift to correct the problem. Note that maximum bass
is only achieved when the sub is in phase with the
speakers in your system.
Connecting Your XJ-700DSP
To Power 2THOR IW-SUB10 or 2 Q10BTransducers
+
+
+
+
THOR IW-SUB10
In-Wall Subwoofers
XJ-700DSP
XJ-700DSP
Q10B Tactile Transducers
NOTE:
A MINIMUM OF 4-OHM LOAD/IMPEDANCE IS REQUIRED ON EACHTERMINAL.
Earthquake Sound Corp. | (800) 576-7944 | www.earthquakesound.com
10 XJ-700DSP Manual
