OH6 INSTALLATION
1.
Cut speaker mounting hole with provided cut
out template.
2.
Wire the OH6 speaker using the non-obtrusive
spring-loaded terminals.
O
H
6
3.
Mount the OH6 speaker utilizing its built-in EZ
Mount System. While firmly holding the tweeter
bridge, simply push the speaker up against the
drywall and turn it clockwise about 15 degrees.
This will engage the EZ Mount System and the
dog ears will move outward forcing the speaker
snug up against the drywall.
4.
With the OH6 speaker in place, slide the orange
lock switch from the unlocked position to the
locked position. Your OH6 speaker is now in-
stalled and ready for use.You can make further
adjustments to bass and treble with the tonal
selector switches located opposite from the
lock switch.
Bass: -4 / -2 / 0
TONAL ADJUSTMENTS
Treble: -2 / 0 / +2
4 OH6 One-Hander Manual
Earthquake Sound Corp. | (800) 576-7944 | www.earthquakesound.com
