EarthQuake MC43, Руководство оператора

Страница: 14 / 32

Page 14
OPERATOR INSTRUCTIONS ANd PARTS
MC43E & MC43 Mini Cultivator
GetEarthquake.com
800-45-6007
MAINTENANCE
STEPS FOR WORkING ON EqUIPMENT
1. Turn off engine switch.
2. Disconnect the spark plug wire from the spark plug.
3. Securely place the disconnected spark plug wire away
from the spark plug and any metal parts. This must al-
ways be done or arcing may occur between spark plug
wire and metal parts.
4. Replace or repair the part on the mini cultivator.
5. Check all parts that were repaired, or removed during
repair, that they are secure and fit correctly.
note: all repair parts must come from the fac-
tory. never replace parts that are not specifically
designed for the mini cultivator.
6. Reconnect the spark plug wire.
MINI CULTIVATOR MAINTENANCE
1. The transmission case has grease installed at the factory.
It is recommended that once a year the gear case be split
by a qualified service professional and the grease level
checked. Add a molylithium type grease only if level of
grease is below top of the gears.
dO NOT OVERFILL.
2. Keep all screws, nuts, and bolts tight.
3. For cold weather operation, store the unit in a cool en-
vironment. Transferring the unit from a warm to a cold
place can cause the build up of harmful condensation.
CAUTION
PRACTICE SAFETY AT ALL TIMES. ENGINE MUST BE
TURNEd OFF ANd ALLOWEd TO COOL, ANd SPARk
PLUG WIRE MUST BE dISCONNECTEd BEFORE
ATTEMPTING ANY MAINTENANCE OR REPAIR.
TO PREVENT ACCIdENTAL STARTING:
ENGINE MUST BE TURNEd OFF ANd COOL, ANd SPARk
PLUG WIRE MUST BE REMOVEd FROM SPARk PLUG
BEFORE ChECkING ANd AdjUSTING ENGINE OR
EqUIPMENT.
TEMPERATURE OF MUFFLER ANd NEARBY AREAS
MAY ExCEEd 150° F (65° C). AVOId ThESE AREAS.
ChECk MINI CULTIVATOR OFTEN FOR LOOSE NUTS
ANd BOLTS. kEEP ThESE ITEMS TIGhTENEd.
NEVER STORE ENGINE WITh FUEL IN ThE TANk INSIdE
A BUILdING. POTENTIAL SPARkS MAY BE PRESENT
FOR IGNITION OF FUEL ANd FUEL VAPORS.
AN AdULT MUST ALWAYS dO MAINTENANCE ANd
REPAIR ON ENGINE ANd MINI CULTIVATOR.
ENGINE MUST BE ShUT-OFF, COOL, ANd SPARk
PLUG WIRE REMOVEd BEFORE ANY REPAIR OR
MAINTENANCE CAN BE dONE.