background image

      © 

2007 

 

Earthcore 

Industries, 

L.L.C.

THIS MANUAL CAN ONLY BE REPRODUCED IN ITS ENTIRETY

Isokern® EPA Phase 2 Qualified Fireplaces

Installation, Operation, Maintenance and Owner’s Manual

Isokern Standard Series, Magnum Series & Magnum 86072 Series

A PRODUCT OF EARTHCORE INDUSTRIES, LLC.

Important: This manual contains assembly rules, installation steps, guidelines, use and maintenance 

instructions for the EPA Phase 2 Qualified Standard Series Fireplace system. This manual must become 

the property of and be reviewed by all current and future users of this product. It is the responsibility of 

the general contractor and the installer of this product to ensure that the instructions in this manual are 

followed exactly and, further that any allowed gas log appliance used in this product be installed in strict 

accordance with NFPA 58, NFPA 54/ANSI Z223.1 and the gas log manufacturer’s explicit installation, sizing 

and operation instructions. It is the responsibility of the general contractor to provide adequate clearances 

from all firebox surfaces as specified in this manual.

INSTALLER: Leave this manual with the appliance

CONSUMER: Retain this manual for future reference

Installation Date______________________________

NOTE: The Catalytic Combustor system should be replaced at a minimum in 3 years, 

maximum of 5 years.

 

Be Sure to Read Entire Manual Before Beginning Construction.

Contents of this manual may change without prior notification.

THIS FIREPLACE IS DESIGNED for USE with

SOLID WOOD LOGS, PLUMBED PROPANE

(LP) or NATURAL GAS (NG), ONLY

WARNING: If the information in this manual is not followed exactly, a fire or explosion may result 

causing property damage, personal injury or loss of life.

SBCCI NO. 9626 

 

 

 

 

 

 

 

 

NYC-MEA 241-90-E

ICC Report NO. ESR-2316   

 

 

 

 

 

      

LA RR NO. 25483

IBC 2006, IRC 2006, IMC 2006 

 

 

 

 

 

 

Issued: February, 2010

 

 

 

 

 

 

 

 

 

 

 

Revision: 003 

Intertek Testing Services Report No. 100244585PRT-006

Omni-Test Laboratories Report No. 257-F-06-3

 

Содержание Isokern Magnum 86072 Series


























Отзывы: