Earth Stove HP-0020S, Руководство пользователя

Страница: 13 / 16

Caution
1. It is important to select and use only pellets that are dry and free of dirt or any impurities such as high
salt content. Dirty fuel will adversely affect the operation and performance of the unit and will void the
warranty. The Pellet Fuel Industries (P.F.I.) has established standards for wood pellet manufacturers. We
recommend the use of pellets that meet or exceed these standards. Ask your dealer for a recommended
pellet type.
2. Please keep the door closing and sealing during burning for good effect and preventing hot ash flying out.
3. The burning features ---bright yellow flame, the pellet burning with a little jumping in the gratebar. No pile
pellet and no smoke venting. If it becomes a little dark glow and lazy flame, smoke appears from the venting
terminal, speed up the convection blower to add the air input.
4. For reducing the heat output, its better to reduce the pellet feed. At the same time turn down the speed
of convection blower and exhaust blower till it reaches the best effect.
5. This stove can work economically by the regular fuel input; try best to avoid long time operation under the
overload for long life use.
5.
Venting pipe and air input pipe should keep unblocked.
Safety instructions
1. The power jack must be grounded.
2.
No combustion or explosive things around the stove when it is operating.
3.
When installing this unit on a combustible floor (for example linoleum, hardwood flooring) a non-
combustible hearth pad (15mm thickness) must be under the unit.
4.
Do not open the stove door to prevent smoke and fire flow out when the stove is operating.
5.
Do not touch the surface when the stove is operating. The high temperature of the stove glass door
and venting pipe will scald you.
6.
Use the solid combustion-supporting to ignite. For safety, do not use gasoline or other combustion or
explosive things to ignite
Maintenance
Maintenance must be handled only when the stove is cold and out of power.
1.
Using a metal scraper, remove material that has accumulated or is clogging the gratebar’s holes.
Then dispose of the scrapped ashes from the gratebar and from inside the burn box to ensure
proper air flow through the gratebar
.
2.
Clean the door glass and doorframe with wet soft cloth and cleanser daily. Check the gasket
complete and well in position or not.
3.
Clean the dust in box weekly. Take out the box, put the dust out, and then sweep the dust with
brush into the ash drawer.
4.
Clean the dust on the heat exchange pipe fortnightly. Close the door first. Heat exchange tube
cleaner rob is to be pulled back and forth a few times in order to clean away any fly ash that may
have collected on the heat exchanger tubes.
5.
Put the ash in the ash drawer out monthly.
6.
When stop using it for a long time, it should be cleaned completely. Especially clean the airmate
board, convection blower and venting pipe.
Page 13 / 16