1. Switch off the unit.
2. Wash out any foam in the filter.
3. Tip away any water around the outlet on the motor housing
before restarting.
BLOWER FUNCTION
The cleaner can be used as a powerful blower:
1. Ensure that the hose, tank and accessories have been
cleaned of any debris before operating the blower function.
2. Protect your eyes with safety goggles when using this
function and ensure that no one else is in close proximity.
3. Insert the hose into the outlet on the top of the motor housing.
4. Uses include blowing leaves into piles and blowing dust out of
difficult areas,
Always switch the unit off before changing between vacuum and blower
functions.
STORAGE
1. Clean out the container and wipe the surface of the unit over
with a damp cloth.
2. Wrap the mains lead around the upper moulding.
3. Locate the two extension tubes, the crevice tool and the
brush tool into the slots above the castors.
4. Store the hose and floor tool inside the collection bin.
MAINTENANCE
After using the cleaner in wet mode, empty, rinse and dry the recovery tank, hose and
accessories. If it has been used for sticky liquid spills, clean the tank and accessories
with warm, soapy water.
Do
NOT
oil the motor. It is lubricated for the life of the product.
There are no serviceable parts inside the cleaner apart from the filters.
IF YOU REQUIRE FURTHER ASSISTANCE THEN PLEASE
CONTACT OUR HELPLINE ON
01483 454666 (Monday – Friday 08:30 – 17:00 excluding
Bank holidays)
or email [email protected]
6
WD0370 0908:Layout 2
2/3/09
13:35
Page 6
