Your Earlex SprayStation
®
5021 can be used with a wide variety of paints, stains and coatings such as
latex, deck and fence stain, sealers, varnishes, wood preservatives, enamels, oil and water-based paints
and automotive paints.
However, some materials cannot be sprayed so please check the recommendation of the manufacturer
before buying the paint. If a material refers to brush application only then it usually cannot be sprayed.
THIS UNIT CANNOT BE USED FOR TEXTURED PAINTS. USE OF THESE MATERIALS WILL
CAUSE PREMATURE WEAR, WHICH WILL VOID YOUR GUARANTEE. TO OBTAIN THE BEST
RESULTS FROM YOUR EARLEX SPRAYSTATION
®
5021 PLEASE READ THE INSTRUCTIONS
CAREFULLY BEFORE USE.
Selecting Spray Material
Preparation of the surface and thinning of the paint are the two most important areas to be concerned
with to obtain the best results from your Earlex SprayStation
®
5021. Ensure all surfaces are free from
dust, dirt, rust and grease. If necessary, rub down with sandpaper or similar. Masking of areas is
important to ensure you do not spray those areas you wish to remain untouched.
Surface and Job Preparation
Fill the Paint Container (16) with the material to be sprayed. Take care not to overfill. Thin if required.
Take the spray gun unit and attach to the paint container by twisting anticlockwise to lock. Ensure the
paint container is secure. Place the motor unit onto a clean and level floor space, free from any loose
debris, liquids or dust sheets that could block the motor inlet. Uncoil the Air Hose (21) and attach it to
the back of the spray gun and the other end to the Earlex SprayStation
®
5021. Uncoil the power cord
from the base of the unit and plug in.
ALWAYS KEEP THE MOTOR UNIT AS FAR AWAY FROM THE SPRAYING AREA AS POSSIBLE TO
PREVENT PAINT CONTAMINATING THE MOTOR. MASK ANY AREA YOU DO NOT WISH TO
SPRAY.
Once you have set up and are ready to spray, switch on the unit. No paint will be sprayed from the gun
until the Trigger (19) on the spray gun is pulled. Before starting any work on spraying actual objects we
suggest you spend time practicing on cardboard or newspaper until you have got used to how the gun
works.
Operation
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Fig.6
5
Vertical Horizontal Round
Содержание Spraystation 5021
Страница 11: ...11 Notes ...