EN
8
HV1900
i
Spend some time practising on cardboard or a similar surface in order
to determine the right flow rate of paint and air for the best spray
pattern. Detailed information about these settings can be found in
chapter 11- 12.
11.
Selecting the Spray Setting
WARNING! DANGER OF INJURY! Never pull the trigger guard while adjusting
the air cap.
Align spray direction lever to desired pattern as indicated (Fig. 4).
Fig. 5 A = vertical flat jet
for large areas; side to side motion
Fig. 5 B = horizontal flat jet
for large areas; up and down motion
Fig. 5 C = circular jet
for corners, edges and hard-to-reach surfaces
12. Adjusting the Material Volume
Set the material volume by turning the material volume adjuster on the rear of the spray
gun (Fig. 6).
+ turn upwards
higher material volume
– turn downwards
lower material volume
13.
Spray Technique
i
The spray result depends heavily on the smoothness and cleanliness of the
surface to be sprayed. Therefore the surface should be carefully prepared and
kept free of dust.
•
Cover all surfaces not to be sprayed.
•
Cover screw threads or similar parts of the target object.
i
Important: Start at the edge of the area to be sprayed. Start the spray
movement first of all, and then press the trigger. Avoid interruptions
within the area to be sprayed.
•
The spray movement should come from the arm, not just from the wrist. This ensures that
a uniform distance is maintained between the spray gun and the spray surface during
the spray operation. Select a distance of 5 - 15 cm, depending on the desired spray jet
width. When you are using interior wall paint, the distance should be about 20-30 cm.
Содержание SPRAY SYSTEM HV 1900
