5
Dispose of the smartphone holder for cars in accordance with local
regulations.
7. INFORMATION ON ENVIRONMENTAL PROTECTION
5.2 MOUNTING THE SMARTPHONE HOLDER
Hang the upper attachment arms (position 1 in the overview) of the
smartphone holder for cars over the rear-view mirror from the rear
side. Pull the lower attachment arms (position 3 in the overview) out
of the smartphone holder so that they can surround the rear-view
mirror. Align the smartphone holder. Press the holding bracket
(position 2 in the overview) right against the rear-view mirror.
5.3 FITTING THE SMARTPHONE INTO THE HOLDER
Pull the clamping jaw (position 7 in the overview) of the
smartphone holder (position 6 in the overview) out and place your
smartphone between the clamping jaws. Release the extended
clamping jaw again.
To align your smartphone, release the knurled nut (position 4 in
the overview) to adjust the swing arm (position 5 in the overview).
Also, your can further adjust the smartphone holder (position 6 in
the overview) by releasing the union nut of the ball joint (position
8 in the overview).
The smartphone holder for cars is maintenance-free when used
in accordance with the intended purpose. Clean the smartphone
holder for cars with a soft, dry cloth only. Do not use any aggressive
cleaning agents or solvent-based cleaners.
6. MAINTENANCE AND CARE
8. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
[email protected]
www.eal-vertrieb.com
Picture 2: Mounting
Picture 3: Inserting the smartphone
