background image

- Disarm without siren chirp :

 

To disarm your system without siren chirp , simply press button        once then within 3sec. 
press button        once. 

 

Note:

 this features is only activated under the system is in armed position,.  

- Silent arm mode  :

The system provide a feature to turn OFF the siren, simply press 2-way button           once 
(while system in disarmed or Acc off position) . The system will respond one lights flash, 
doors lock, disable engine starter, LED will begin flashing quickly until all sensor inputs 
are active - LED will start blinking slowly (flash once per second) to indicate the system 
is full armed.  

Note:

 Under Silent Arm mode, if Sensor, Door, Hood or trunk been triggered, the siren will

           not activated, but if Ignition been triggered will activated the siren. 

  

- Automatic REARM: 

If the system is disarmed by remote and a door is not opened within approximately 40 
seconds the system will automatically rearm itself. This feature guards against disarming 
caused by accidental or unintended operation of the remote transmitter.  Main unit will 
sends signal to the 2-Way LCD remote and indicates ARM mode with one beep sound.  

- Passive arm 

(programmable)

:

  

If set programme mode to  

"WITH"

, while turn Ignition OFF, then close the last door ,

system will provide 2 siren chirp and  2 light flash and LED flashing fast to indicated that 
the system is in passive arming mode. After 30sec. The system will arm by itself and 
LED flashing slowly to show the system is in arming mode. Main unit sends the signal to 
the 2-Way LCD remote and indicates ARM mode with one beep sound . 
This system also provide under passive arming with door lock or without door lock 
feature  (please see "programme mode" features. ) During the period of 30sec. passive 
arming, if a door is opened, Led will light on and it will re-passive arming when the door 
closed again. 

- Panic mode:

 

If you are threatened in or near your vehicle, you can attract attention by press button         
for 2sec. system will triggering for 30sec. To stop Panic mode at any time, simply press 
any button  once. 

Note:

 if Panic mode activate in disarmed position, the 2-way remote will respond melody 

sound and LCD indicates flashing icons as under: 

Note: 

To stop Panic mode, simply press any button once  of remote once. 

2-way LCD display : 

2-way LCD display : 

+ One beep sound

+ Melody sound

-8-

Содержание E1 Plus






















Отзывы: