manualshive.com logo in svg

Eagle IntelliMap 500C, Инструкция по установке и эксплуатации

Eagle IntelliMap 500C - это передовая эхолотная система для рыболовов. Скачайте бесплатно "Инструкцию по установке и эксплуатации" на manualshive.com и начните использовать свою электронную карту для нахождения рыбы даже в самых труднодоступных местах. Компактный и удобный в управлении, этот прибор станет незаменимым помощником на воде.

Поделиться
Скачать
background image

130 

DATABASES LIMITED WARRANTY

 

"We", "our", or "us" refers to Eagle Electronics, a division of LEI, the manufac-
turer of this product. "You" or "your" refers to the first person who purchases 
the product as a consumer item for personal, family, or household use. The Da-
tabases Limited Warranty applies to the one or more databases that your prod-
uct may contain. We refer to each of these as a "Database" or together as the 
"Databases." Your product may thus include the "WBS Database" which con-
tains worldwide background surface mapping data, the "SmartMap Database" 
which contains inland mapping data, or other Databases. 

We warrant to you that we have accurately compiled, processed, and repro-
duced the portions of the source material on which the Databases are based. 
However, we are under no obligation to provide updates to the Databases, and 
the data contained in the Databases may be incomplete when compared to the 
source material. WE MAKE NO EXPRESS OR IMPLIED WARRANTY OF 
ANY KIND ABOUT THE ACCURACY OF THE SOURCE MATERIAL ITSELF, 
INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MER-
CHANTABILITY OR FITNESS FOR a PARTICULAR PURPOSE. 

If there is a defect in any Database, your exclusive remedy shall be, at our op-
tion, either a refund of the price you paid for the product containing the defec-
tive Database or a replacement of such product. WE WILL NOT UNDER ANY 
CIRCUMSTANCES BE LIABLE TO ANYONE FOR ANY SPECIAL, CONSE-
QUENTIAL, INCIDENTAL, OR OTHER INDIRECT DAMAGE OF ANY KIND. 

Some states do not allow the exclusion or limitation of incidental or consequential 
damages, so the above limitations or exclusions may not apply to you. 

This warranty does NOT apply in the following circumstances: (1) when the 
product has been serviced or repaired by anyone other than us, (2) when the 
product has been connected, installed, combined, altered, adjusted, or handled 
in a manner other than according to the instructions furnished with the prod-
uct, (3) when any serial number has been effaced, altered, or removed, or (4) 
when any defect, problem, loss, or damage has resulted from any accident, mis-
use, negligence, or carelessness, or from any failure to provide reasonable and 
necessary maintenance in accordance with the instructions of the owner’s man-
ual for the product. 

We reserve the right to make changes or improvements in our products from 
time to time without incurring the obligation to install such improvements or 
changes on equipment or items previously manufactured. 

This warranty gives you specific legal rights and you may also have other rights 
which may vary from state to state. 

Your remedies under this warranty will be available so long as you can show in 
a reasonable manner that the defect occurred within one (1) year from the date 
of your original purchase, and we must receive your warranty claim no later 
than 30 days after such 1-year period expires. Your claim must be substanti-
ated by a dated sales receipt or sales slip. 

Содержание IntelliMap 500C













































































































































Отзывы:

Нет отзывов

Похожие инструкции для IntelliMap 500C

Lowrance HDS-5x Quick Start Manual preview
HDS-5x
Бренд: Lowrance Страницы: 4
Venterior VT-FF004E User Manual preview
VT-FF004E
Бренд: Venterior Страницы: 20
Standard Horizon CPV550 Owner'S Manual preview
CPV550
Бренд: Standard Horizon Страницы: 148

Бренды по названию

Популярные бренды

Загрузить еще бренды