Eagle Golf Car Скачать руководство пользователя страница 6

STARTING:

STOPPING:

a) With the park brake applied, press the forward/reverse switch and lock it in 
the desired position.

CAUTION!

Do not shift from Forward 

 to Reverse 

while the golf car is moving.

b) Turn the power key to ON position.

Do not step down the accelerator pedal when turning on the power key, 
otherwise, the golf car may suddenly start moving.

c) Check that your path is clear in the direction you will go, and slowly step 
down the accelerator pedal, the golf car will start to move.

NOTE: 

The park brake automatically releases when the accelerator pedal is 

stepped down.

If the accelerator pedal is stepped down before the power key is switched on, 
the car will not run. In this case, you should release the accelerator pedal first, 
then turn the power key to ON position, then step down the accelerator pedal 
again, the golf car will start moving. 

To stop the golf car, gradually press down on the brake pedal. When the golf 
car has come to a stop, apply the parking brake pedal and turn the power key to 
OFF position.

CAUTION:

Do not hold the golf car on an incline with the accelerator, please use the brake.

OPERATION FOR GOLF CAR WITH HYDRAULIC BRAKE SYSTEM 
(optional)

 

If your golf car comes with hydraulic brake, then please refer to the separated 
page for its operation and maintenance.

Users should perform regular maintenance to insure the golf car in good 
performance.

WARNING!

 

WARNING! 

6.  MAINTENANCE

MAINTENANCE OF BATTERY

WARNING!

WARNING!

 

 

Battery electrolyte is poisonous and dangerous, may cause 

sever burns, injury, etc. Always wear protective clothing, gloves, and 
goggles when handling batteries, electrolyte, and charging your battery.

KEEP OUT OF REACH OF CHILDREN.

1)  Cleaning 

a. The exterior of the battery, the connection wires and bolts should always 

be kept clean and dry. When cleaning, please make sure all vent caps are 
tightly in place. Clean the battery top with a cloth or brush and solution of 
baking soda and water. When cleaning, do not allow any cleaning solution, 
or other foreign matter to get inside the battery. This should be done every 
week.

b.Clean battery terminals and the inside of cable clamps using a post and 

clamp cleaner. Clean terminals will have a bright metallic shine. This 
should be done when it is necessary.

c.Reconnect the clamps to the terminals and thinly coat them with petroleum 

jelly (Vaseline) to prevent corrosion.

Before you disconnect any battery cable from any terminal 

on the battery, please always remove the power by disconnecting the main 
battery cable from the controller. 

2) Checking the terminals and nuts

The connection of the battery should always be kept in good condition. Please 
check every week on whether any battery cable terminal or nut has become 
loose in order to prevent any sparkle or damage to terminals. Please check 
every week on whether any battery cable is damaged or not, the damaged 
battery cable should be replaced immediately. 

3) No foreign matter

Do not place any objects on the battery and do not connect the positive pole to 
the negative pole. This may cause a short circuit, dangerous spark or may 
cause damage to the battery or injury to your body. 

4) Recharging

a. As long as you use the golf car, regardless of how long you have used it, 

the battery shall be recharged fully on the same day. Any delay on the 

Содержание Golf Car













Отзывы: