manualshive.com logo in svg

Eagle FISHSTRIKE 1000C, Инструкция по установке и эксплуатации

Мануал по установке и эксплуатации Eagle FISHSTRIKE 1000C доступен для бесплатного скачивания на нашем сайте. Этот рыболовный прибор обеспечит вам высокое качество и точность при ловле рыбы. Скачайте его сейчас и начните использовать свой Eagle FISHSTRIKE 1000C!

Поделиться
Скачать
background image

187

DATABASES LIMITED WARRANTY

"We", "our", or "us" refers to Eagle Electronics, Inc., the manufacturer of this
product. "You" or "your" refers to the first person who purchases the product as
a consumer item for personal, family, or household use. The Databases Limited
Warranty applies to the one or more databases that your product may contain.
We refer to each of these as a "Database" or together as the "Databases." Your
product may thus include the "WBS Database" which contains worldwide
background surface mapping data, the "SmartMap Database" which contains
inland mapping data, or other Databases.

We warrant to you that we have accurately compiled, processed, and
reproduced the portions of the source material on which the Databases are
based. However, we are under no obligation to provide updates to the
Databases, and the data contained in the Databases may be incomplete when
compared to the source material. WE MAKE NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND ABOUT THE ACCURACY OF THE SOURCE
MATERIAL ITSELF, INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.

If there is a defect in any Database, your exclusive remedy shall be, at our
option, either a refund of the price you paid for the product containing the
defective Database or a replacement of such product. WE WILL NOT UNDER
ANY CIRCUMSTANCES BE LIABLE TO ANYONE FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR OTHER INDIRECT DAMAGE OF
ANY KIND.

Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to
you.
This warranty does NOT apply in the following circumstances: (1) when the
product has been serviced or repaired by anyone other than us; (2) when the
product has been connected, installed, combined, altered, adjusted, or handled
in a manner other than according to the instructions furnished with the
product; (3) when any serial number has been effaced, altered, or removed; or
(4) when any defect, problem, loss, or damage has resulted from any accident,
misuse, negligence, or carelessness, or from any failure to provide reasonable
and necessary maintenance in accordance with the instructions of the owner’s
manual for the product.
We reserve the right to make changes or improvements in our products from
time to time without incurring the obligation to install such improvements or
changes on equipment or items previously manufactured.
This warranty gives you specific legal rights and you may also have other
rights which may vary from state to state.
Your remedies under this warranty will be available so long as you can show in
a reasonable manner that the defect occurred within one (1) year from the date
of your original purchase, and we must receive your warranty claim no later
than 30 days after such 1-year period expires. Your claim must be
substantiated by a dated sales receipt or sales slip.

Содержание FISHSTRIKE 1000C













































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для FISHSTRIKE 1000C

Humminbird DUAL BEAM 250DX Operation Manual preview
DUAL BEAM 250DX
Бренд: Humminbird Страницы: 36
Garmin GPSMAP 8000 Series Installation Instructions Manual preview
GPSMAP 8000 Series
Бренд: Garmin Страницы: 14
Humminbird 747c Operation Manual preview
747c
Бренд: Humminbird Страницы: 96
Navman FISH 4500/4600 Installation And Operation Manual preview
FISH 4500/4600
Бренд: Navman Страницы: 36

Бренды по названию

Популярные бренды

Загрузить еще бренды