Eagle FishElite 320, Инструкция по установке и эксплуатации

Страница: 183 / 200

175
1. From the Map Page, press
MENU
|
↓
to
F
IND
S
TREETS
|
ENT
and the Find
Streets Menu appears.
2. You must fill in a street name in the First Street dialog box. Press
ENT
to display the Find By Name menu. There are two options:
A.
You
can
spell out
the street in the top selection box. Press
↑
or
↓
to change
the first letter, then press
→
to move the cursor to the next letter and
repeat until the name is correct, then press
ENT
|
ENT
. B. Or you can
jump down to the lower box and pick a street from the selection list .
Press
ENT
, then press
↓
or
↑
to select a street from the list and press
ENT
.
3. The Find Streets menu reappears with the street you're searching for
in the First Street box. (In this example, it's 80th Street.)
4. Now fill in the second street. Press
↓
to
S
ECOND
S
TREET
|
ENT
and the
Find By Name menu appears again. Just like before, there are two op-
tions:
A.
You can
spell out
the second street in the top selection box.
Press
↑
or
↓
to change the first letter, then press
→
to move the cursor
to the next letter and repeat until the name is correct, then press
ENT
|
ENT
. B. Or you can jump down to the lower box and pick the sec-
ond street from the selection list . Press
ENT
, then press
↓
or
↑
to se-
lect a street from the list and press
ENT
.
5. The Find Streets menu reappears with the first and second street
dialog boxes filled in. In this example, we selected 71st Street as our
second street. You could now use similar techniques to select a city or
Zip code, but your search will probably be faster if you leave those
boxes blank. (You can specify a city and/or Zip code later on to narrow
the search, if the resulting list is too long.)
Find Intersection command highlighted, left, and
"Working" message, center. At right is the Intersections Found list.
6. To search for the intersection of the two streets, press
↓
to
F
IND
I
NTERSECTION
|
ENT
. A message appears asking you to wait while the unit
finds the intersection. When the Intersections Found list appears, press