EAGLE VISION EV3000-D, Руководство пользователя

Страница: 44 / 107

EV3000-D manual
Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law
is prohibited. ©2008 United Vision solutions, Co., Specifications are subject to change. Check website:
www.unitedvisionsolutions.com
u–G Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7
49 Camera
Power
on at
camera 2
Command FFh Receiver
ID
00h 09h 00h 0Ch Checksum
EV3000-D
Response u–•ŒG
Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of
Byte3 to Select Camera 2.) DC 12V IR power supply of Thermal
camera Will be electrically Turned On by EV3000-D Receiver
Without any command sending to thermal camera (
default state ).But
DC12V Defroster supply will always be turned on state.
50 Camera
Power
off at
camera 2
Command FFh Receiver
ID
00h 0Bh 00h 0Ch Checksum
EV3000-D
Response u–•ŒG
Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of
Byte3 to Select Camera 2.) DC 12V IR power supply of Thermal
camera Will be electrically Turned Off by EV3000-D Receiver
without any command sending to thermal camera. But DC12V
Defroster supply will always be turned on state.
51 Initialize
PAN/TI
LT
Command FFh Receiver
ID
00h 0Fh 00h 00h Checksum
EV3000-D
Response u–•ŒG
Description Receiver ID=00h~FEh, Pan/Tilt will go to Preset position No."0"
which is stored in EEPROM of EV3000-D receiver when
manufactured in factory.