Eagle Peak GHPC48V2-GRN-AZ Скачать руководство пользователя

Страница: 4 / 56

IMPORTANT

• Please read and understand this manual before any assembly. Before beginning assembly of the

product, make sure all parts are present. Compare parts with packaging contents list.

• Place all parts from the box in a cleared area and organize them for assembly.
• Remove all packing materials and place them back into the box. Do not dispose of the packing

materials until assembly is completed.

• DO NOT tighten the screws before PC panel assembly in order to ensure all the parts fit with each

other.

• The holes in the aluminum greenhouse are oval. If necessary, all parts of the greenhouse can be

moved and adjusted before installation complete.

• It will take 6-8 hours to set up the greenhouse with 2-3 people. Please leave ample time to do the

assembly, and do not stop once assembly has begun. A partially assembled greenhouse frame may
be damaged or destroyed due to bad weather.

• Read each step carefully before beginning any assembly and make sure you understand each step.

If any part is missing, or if you have any questions, please contact the customer service

[email protected].

· Needed for assembly: (The following tools are

NOT

included)

Tape Measure

Ladder

Goggles

Slotted Screwdriver

Drill

Pliers

Содержание GHPC48V2-GRN-AZ

























































Результаты поиска

Содержание GHPC48V2-GRN-AZ

Отзывы:

Похожие инструкции для GHPC48V2-GRN-AZ

Бренды по названию

Популярные бренды

Eagle Peak GHPC48V2-GRN-AZ, Инструкция по эксплуатации

Результаты поиска

Содержание GHPC48V2-GRN-AZ

Отзывы:

Похожие инструкции для GHPC48V2-GRN-AZ

Бренды по названию

Популярные бренды