Install casters onto Mobile Units.
If your unit is a Stationary Unit, go back to page 5.
Spec-Master
®
Hot Food Table with Sealed-in Wells
ASSEMBLY INSTRUCTIONS
Note: Casters with brake typically go at the REAR of the unit.
1. After removing crate above shipping pallet gently lay the unit onto its back.
Caution:
Use cardboard or other material to prevent scratching.
2. Carefully unbolt unit from shipping pallet.
2. Affix casters to unit.
• At each corner, align holes in caster plate with the four outer holes on unit, as shown in
figure 1b
.
• Run bolt through washer and caster plate, into each hole, as shown in
figure 1b
.
• Repeat on remaining corners.
3. Place unit upright.
MOBILE UNIT
figure 1b
caster plate
washer
bolt
unit
6
(continued on next page)
