Install legs onto Stationary Units.
If your unit is a Mobile Unit, skip this page and refer to page 6.
(continued on next page)
Spec-Master
®
Hot Food Table with Sealed-in Wells
ASSEMBLY INSTRUCTIONS
STATIONARY UNIT
plate
leg
figure 1a
unit
5
1. After removing crate above shipping pallet, gently lay the unit onto its back.
Caution:
Use cardboard or other material to prevent scratching.
2. Carefully unbolt unit from shipping pallet.
3. Attach legs to unit.
• At each corner, align leg and plate with center hole on unit, as shown in
figure 1a
.
• Screw leg into threaded hole until snug.
• Repeat on remaining corners.
4. Place unit upright.
