Slide Gate Operators / Eagle-2000 Series / Eagle-1000 Series
____________________
Slave Control Options
____________________
Selecting The Delay Functions
The Eagle "Diamond" Control board was uniquely designed to allow the slave control to
communicate to the master board all of the "Open-Delay" and "Close Delay" functions.
If no delay functions are needed, switches 5 through 8
must be in the off position.
Setting The Open Delay Function
Switches 5 & 6: Open Delay Slave (On/Off) - Selecting the
switch to the "on" position delays the Slave (Sw. 5) or Master
(Sw. 6) operator by 1 1/2 seconds on the open cycle. This
is useful with magnetic lock applications.
Setting The Close Delay Function
Switches 7 & 8: Close Delay Master (On/Off) - Selecting the
switch to the "on" position delays the Slave (Sw. 7) or
Master (Sw. 8) operator by 1 - 6 seconds on the close cycle
(adjustable by the Slave Timer shown below).
SLAVE TIMER
Diamond Control Board
Distributed by AFW Access Systems • www.AnchorMiami.com/afwas
(14)
Switch #1
must be set to the Slave
or to the "off" position.
Switch #2
must be set to the "open
left" or to the "open right" position.
Switch #3
brake on / off.
Switch #4
Not in use.
