Hardware Reference and Operational Manual: RemoteBox
Page 13
Section 2
Configuration
Programming the RemoteBox is easy. To access the different configuration menus
press the RED button on the front of the device. The RemoteBox will go into
programming mode showing the following subset of screens.
•
Next menu, press the
⇧button
(Up arrow).
•
To return to the previous menu, press the
⇩button
(Down arrow).
•
To change to the next option, press the
⇨button
(Right arrow).
•
To return to the previous option, press
⇦button
(Left arrow).
Pressing the RED button, it will Save and exit the configuration menu.
RemoteBox will exit the Configuration menu automatically after 9 seconds of
inactivity.
These are the configuration options:
SET1: RA Select
Select the Antenna for Radio 1 (Radio A) for Manual or Automatic mode. In the
automatic mode the RemoteBox will select the antenna when it senses a band
change on Radio A.
These are the available options:
•
Manual: Manual selection of the antennas
•
Band Data: Antenna selection based on Band Data (BD1).
•
ICOM Band Voltage: Antenna selection based on voltage levels compatible
with ICOM.
SET2: RB Select
Select the Antenna for Radio 2 (Radio B) for Manual or Automatic mode. In the
automatic mode the RemoteBox will select the antenna when it senses a band
change on Radio B.
These are the available options:
•
Manual: Manual selection of the antennas
•
Band Data: Antenna selection based on Band Data (BD2).
•
ICOM Band Voltage: Antenna selection based on voltage levels compatible
with ICOM.
This option is only available in the “2x” models. (2x6 or 2x8)
