e2v ELIIXA+ 8k/4k CL, Руководство пользователя

Страница: 53 / 56

® 8k/4k CL Color
53
e2v semiconductors SAS 2014
12.7 Camera Status
Feature Commands Description
PrivilegeLevel r lock Get camera running privilege level
0 = Privilege Factory
1 = Privilege Advanced User
2 = Privilege User
ChangePrivilegeLevel w lock 1 Lock camera privilege to “Advanced User”
w lock 2 Lock camera privilege to “User”
w lock <val> Unlock camera privilege depending on <val> (min=256; max=2 32 -1)
DeviceTemperature
r temp Read Mainboard internal temperature (format signed Q10.2 = signed 8 bits,
plus 2 bits below comma. Value from -512 to +511) in °C
DeviceTemperatureSelector
Xml Virtual
Standby r stby Read Standby state (CMOS sensor)
w stby 0 Disable standby mode (“False”)
w stby 1 Enable standby mode (“True”), no more video available but save power and
temperature
r stat Get camera status (see below for details)
StatusWaitForTrigger Bit 0: true if camera waits for a trigger during more than 1s
Satus trigger too fast Bit 1: true if camera trigger is too fast
StatusWarningOverflow Bit 8: true if a an overflow occurs during FFC calibration or Tap balance
(available only for integrator/user mode)
StatusWarningUnderflow Bit 9: true if a an underflow occurs during FFC calibration or Tap balance
(available only for integrator/user mode)
Cc3 Scrolling direction Bit 11: 0 : forward, 1: reverse
StatusErrorHardware Bit 16 : true if hardware error detected
12.8 Communication
Feature
Commands Description
ComBaudRate r baud Get current baud rate (This feature is not saved in camera)
w baud 1 Set baud rate to “9600Bds”
w baud 2 Set baud rate to “19200Bds”
w baud 6 Set baud rate to “57600Bds”
w baud 12 Set baud rate to “115200Bds”
12.9 Line Profile Average
Feature Commands Description
LineAverageProfile r pixs Get the line Line Average Profile status
-
1 : running
-
0 : finished
w pixs 0 Abort the Line Average Profile
w pixs 1 Run the Line Average Profile
PixelAccessLineNumer r pixl Get the number of line for average
w pixl <val> Set the number of line to accumulate
- <val> : 1,256,512,1024
No direct feature r pixv <addr> Read 128 pixel values starting from address <addr>, from SensorWidth-128-1. Return
value is in hexadecimal, without space between values. (one unsigned short per coef)
PixelRoiStart r prod Get Roi start
w prod <val> Set Roi start for pixel statistic computing (0 to SensorWidth -1-1)
PixelRoiWidth r prow Get Roi width
w prow <val> Set Roi width for pixel statistic computing (1 to SensorWidth)
RedPixelROIMean r pavr Get ROI Mean value for Red Pixels (format U12.4)
RedPixelROIStandardDeviation r pstr Get ROI Stand deviation for Red Pixels (format U12.4)
RedPixelROIMin r pmir Get ROI Min value for Red Pixels (format U12.4)
RedPixelROIMax r pmar Get ROI Max value for Red Pixels (format U12.4)
BluePixelROIMean r pavb Get ROI Mean value for Blue Pixels (format U12.4)